Quick Start

After assembling the keyboard, or receiving a pre-soldered keyboard, it is possible to start using it without the 3.7V lithium batteries.

This keyboard is designed to be as flat as possible. When the USB-C connector is used, because of the cable, it is expected that the keyboard does not sit perfectly flat on the table.

Most users use this as a wireless keyboard without an always-connected USB-C cable, so this is not an issue. If you prefer the keyboard to stay flat while USB-C cable is connected, attach taller rubber feet to the bottom case or use a magnetic tenting stand.

Connect the left side to the computer with a USB data cable, but not a charging-only cable.

Connect the right side to the computer with a USB data or charging-only cable.

The right side connects to the left side via Bluetooth.

You should be able to type now.

ZMK Studio

To modify the keymap, ZMK studio can be used. Alternatively, compiling your own ZMK firmware is recommended.

To unlock the keyboard, press the middle key of the thumb cluster, followed by the key in the Z position.

Next Steps

You might want to install batteries, and start making your own keymap.