beekeeb
  • Home
  • FAQ
  • Layout Testers
  • Keyboards with Cirque Trackpad
  • Allium58 Keyboard
    • Photo logs of installing Allium58 GLP 3D printed keyboard case
  • Cantor Keyboard
  • Chocofi Keyboard
    • Soldering a battery on a Chocofi Wireless
  • Dao Choc BLE Keyboard
  • DASBOB Keyboard
  • FelixKeeb
  • Ferris Sweep Keyboard
  • Hillside Keyboard
  • Hotreus62 Keyboard
  • keezyboost40
  • Piantor Keyboard
    • Quick Start Guide to Build a Piantor (Raspberry Pi Pico)
    • Quick Start Guide to Build a Piantor (WeAct RP2040)
    • Extra Firmwares
  • Pierce Keyboard
  • Stress Fight Pad
  • Swoop Keyboard
  • Thorium Keyboard
  • Yampad Keyboard
  • Zerosprey42 Keyboard
  • Raspberry Pi Pico and Other RP2040 Boards
  • Keyboard Build Guide
    • Avalanche v4.2 Photo Build Log
    • elephant42 Keyboard Photo Build Log
      • elephant42 QMK Firmware with VIA
      • Acrylic Case with Fabric Middle Plates for Split Keyboard Installation
    • Redox v1 (rev 1.0) Build Log
    • Sofle RGB v2.1 SofleKeyboard Photo Build Log
      • Extra Photos for Soldering the RGB LEDs
    • REVIUNG41 Case Installation
    • TOTEM Case Installation
  • Other Guides
    • How to Install display, battery and Test the Wireless Corne Keyboard
    • Installing a Battery to the Ferris Sweep v2
    • Adding nice!view to a Keyboard with a 4-pin OLED Compatible Shield with a Hidden Wire
    • How to Flash a Firmware to USB-C Controller
    • How to Flash a Firmware with OpenOCD
Powered by GitBook
On this page
  • Hillside52 / HSHS52 Layout Testing
  • Pre-compiled firmware
  • Firmware for RP2040 boards

Was this helpful?

Hillside Keyboard

PreviousFerris Sweep KeyboardNextHotreus62 Keyboard

Last updated 13 days ago

Was this helpful?

Hillside52 / HSHS52 Layout Testing

Pre-compiled firmware

Firmware for RP2040 boards

12KB
hillside52HSHS52.pdf
pdf
77KB
handwired_hillside_52_vial.hex
95KB
handwired_hillside_52_vial_promicro_rp2040.uf2