beekeeb
  • Home
  • FAQ
  • Layout Testers
  • Keyboards with Cirque Trackpad
  • Allium58 Keyboard
    • Photo logs of installing Allium58 GLP 3D printed keyboard case
  • Cantor Keyboard
  • Chocofi Keyboard
    • Soldering a battery on a Chocofi Wireless
  • Dao Choc BLE Keyboard
  • DASBOB Keyboard
  • FelixKeeb
  • Ferris Sweep Keyboard
  • Hillside Keyboard
  • Hotreus62 Keyboard
  • keezyboost40
  • Piantor Keyboard
    • Quick Start Guide to Build a Piantor (Raspberry Pi Pico)
    • Quick Start Guide to Build a Piantor (WeAct RP2040)
    • Extra Firmwares
  • Pierce Keyboard
  • Stress Fight Pad
  • Swoop Keyboard
  • Thorium Keyboard
  • Yampad Keyboard
  • Zerosprey42 Keyboard
  • Raspberry Pi Pico and Other RP2040 Boards
  • Keyboard Build Guide
    • Avalanche v4.2 Photo Build Log
    • elephant42 Keyboard Photo Build Log
      • elephant42 QMK Firmware with VIA
      • Acrylic Case with Fabric Middle Plates for Split Keyboard Installation
    • Redox v1 (rev 1.0) Build Log
    • Sofle RGB v2.1 SofleKeyboard Photo Build Log
      • Extra Photos for Soldering the RGB LEDs
    • REVIUNG41 Case Installation
    • TOTEM Case Installation
  • Other Guides
    • How to Install display, battery and Test the Wireless Corne Keyboard
    • Installing a Battery to the Ferris Sweep v2
    • Adding nice!view to a Keyboard with a 4-pin OLED Compatible Shield with a Hidden Wire
    • How to Flash a Firmware to USB-C Controller
    • How to Flash a Firmware with OpenOCD
Powered by GitBook
On this page
  • Controller - RP2040 Sea Picro
  • Controller - Atmega32u4 Pro Micro
  • Controller - nice!nano v2

Was this helpful?

Ferris Sweep Keyboard

PreviousFelixKeebNextHillside Keyboard

Last updated 6 months ago

Was this helpful?

Controller - RP2040 Sea Picro

Vial Firmware with MASTER_LEFT for RP2040 boards with NKRO

Vial Firmware with MASTER_LEFT for RP2040 boards

Controller - Atmega32u4 Pro Micro

VIA Firmware with MASTER_LEFT for Atmega32u4 boards

Controller - nice!nano v2

Pre-compiled ZMK firmware (or choosing Cradio/Sweep in ZMK keyboard selection )

https://zmk.dev/docs/user-setup#keyboard-selection
86KB
ferris_sweep_vial_promicro_rp2040_nkro.uf2
83KB
ferris_sweep_vial_rp2040_ce_master_left.uf2
49KB
ferris_sweep_via_master_left.hex
384KB
cradio_left-nice_nano_v2-zmk.uf2
306KB
cradio_right-nice_nano_v2-zmk.uf2